Aturex | Products | Epoxy Hardener 中文
Your Location: Home > Products>Epoxy Hardener>

Modified Cycloaliphatic Amines (Adducts)

Principal properties: Principal applications:
- Cure at low temperatures under damp conditions. - Solvent-free and high-solids coatings.
- Good film properties e.g., excellent gloss, low amine blush and water insensibility - Self-leveling and screed floors.
- Excellent color and color stability. - Chemically resistant linings and secondary containment.
- Good adhesion and very good chemical resistance. - Tile grouts and adhesives.
- Range of cure times and pot lives. - Two-component printing inks.
- Very good heat-cure performance, including chemical resistance, electrical and mechanical properties. - Electrical encapsulation.
  - Wet lay-up laminating.
Epoxy Hardener Type Viscosity   (mPa·s/25°C) Amine Value Color Specific Gravity Solids Thin Film Set Time (hr/25°C) Typical Cure Schedule PDF
(mg KOH/g) (Gardner) (25°C) (%)
ATUREX 250 Modified Cycloaliphatic Amine 300-600 415-445 <2 0.99 - 8.0 2-7 days at ambient
ATUREX 285 Cycloaliphatic Amine Adduct 70-180 375-405 <2 1.00 - 5.0 2-7 days at ambient
ATUREX 365LC Modified Cycloaliphatic Amine Adduct 300-700 345-375 <2 1.05 - 5.5 2-7 days at ambient
ATUREX 380 Modified Cycloaliphatic Amine 70-170 270-300 <2 1.02 - 7.5 2-7 days at ambient
ATUREX 395LC Modified Cycloaliphatic Amine Adduct 300-700 325-355 <2 1.05 - 5.0 2-7 days at ambient
ATUREX 420 Modified Cycloaliphatic Amine 50-110 245-275 <2 1.02 - 8.0 2-7 days at ambient
ATUREX 420S Modified Cycloaliphatic Amine 200-400 245-275 <3 1.03 - 5.5 2-7 days at ambient
ATUREX 425 Cycloaliphatic Amine Adduct 300-500 250-280 <2 1.03 - 7.0 2-7 days at ambient
ATUREX 425S Modified Cycloaliphatic Amine Adduct 200-400 250-280 <2 1.03 - 4.0 2-7 days at ambient
ATUREX 455 Modified Cycloaliphatic Amine Adduct 200-400 230-260 <2 1.03 - 9.0 2-7 days at ambient
ATUREX 340 Cycloaliphatic Amine Adduct 70-180 315-345 <2 1.02 - 6.0 2-7 days at ambient