| Principal properties: | Principal applications: | ||||||||||
| - High reactivity, fast cure at ambient or low temperatures. | - Heat-resistant coatings and adhesives. | ||||||||||
| - Good chemical resistance, electrical and mechanical properties. | - Electrical encapsulation, tooling and casting. | ||||||||||
| - High heat resistance. | - Middle coatings or primers for flooring. |
| Epoxy Hardener | Type | Viscosity (mPa·s/25°C) | Amine Value | Color | Specific Gravity | Solids | Use Level | Thin Film Set Time (hr/25°C) | Typical Cure Schedule | |
| (mg KOH/g) | (Gardner) | (25°C) | (%) | (phr) | ||||||
| ATUREX 220F | Modified Aliphatic/ Aromatic Amine | 200-600 | 570-610 | <12 | 1.08 | - | 25 | 9.0 | 2-7 days at ambient | 
|
| ATUREX 270 | Modified Aliphatic/ Aromatic Amine | 150-300 | 520-560 | <12 | 1.01 | - | 30 | 3.0 | 2-7 days at ambient |
|
| ATUREX 305 | Modified Aliphatic/ Aromatic Amine | 250-450 | 430-470 | <12 | 1.03 | - | 35 | 4.0 | 2-7 days at ambient |
|
| ATUREX 400CN | CNSL Mannich Base | 2500-6500 | 230-270 | <18 | 1.08 | - | 50 | 7.5 | 2-7 days at ambient |
|
| ATUREX 655CN | CNSL Mannich Base | 800-1800 | 130-170 | <18 | 1.06 | - | 100 | 8.0 | 2-7 days at ambient |
|
Dimer Acid for oilfield corrosion inhibitors,surfactants,lubricants
Dimer Acid for high grade polyamide resins,alkyd resins,hot melt adhesive
Epoxy Hardener for surface coating/primer coating
Epoxy Hardener for adhesive
Epoxy Hardener for potting,casting